How to Install a Rius Water Charging Chamber (Step-by-Step)

Installing the Rius Water Crystal Charging Chamber is one of the simplest upgrades you can make to your home or business water system. No plumber required. No special tools. No electricity. In about 30 minutes, you'll go from ordinary filtered water to structured, energetically amplified water from every connected tap.

Here's exactly how to do it — step by step.

Before You Begin: What You Need

The Crystal Charging Chamber connects to your existing water filtration system via a standard 1/4" post-filter line. Before you start, make sure you have:

A reverse osmosis or filtration system already installed. The Charging Chamber doesn't replace your filter — it works after it. Your RO system removes contaminants, and the Charging Chamber then restructures, remineralizes, and amplifies the clean water. If you're new to filtration, our complete guide to reverse osmosis filtration will help you understand how each stage works.

Standard 1/4" tubing. Most residential RO systems use 1/4" tubing as the post-filter output line. The Charging Chamber connects directly to this line. If your system uses a different size, a simple adapter from any hardware store will work.

A clean, accessible space. The Charging Chamber is compact enough to fit under most kitchen sinks alongside your existing filtration system. It can also be mounted horizontally or vertically depending on your available space.

Step 1: Turn Off Your Water Supply

Start by turning off the water supply to your filtration system. Most RO systems have a dedicated shutoff valve on the cold water line. Turn it clockwise until it stops. Then open the faucet connected to your RO system to release any pressure in the line.

This step takes about 30 seconds and ensures a clean, drip-free installation.

Step 2: Locate the Post-Filter Output Line

Find the tubing that runs from the last stage of your filtration system to your faucet. This is the post-filter line — the water has already been filtered and is on its way to your tap. The Crystal Charging Chamber connects in-line at this point, so the filtered water passes through the crystal matrix before reaching your glass.

If you're unsure which line is the post-filter output, trace the tubing from your RO faucet backward. The first connection it meets on the filtration system side is where you'll install the Charging Chamber. For more detail on how your system's stages work together, see our guides on carbon filtration and RO membrane filtration.

Step 3: Disconnect the Post-Filter Line

Gently disconnect the 1/4" tubing from the output of your last filter stage. Most connections use push-fit fittings — press the collet (the small ring around the fitting) inward while pulling the tubing out. Have a small towel handy to catch any residual water in the line.

Step 4: Connect the Charging Chamber Inline

The Crystal Charging Chamber has an input and output port, both designed for standard 1/4" tubing. Connect the tubing from your filter's output to the Charging Chamber's input port. Then run a new section of 1/4" tubing from the Charging Chamber's output port to your faucet connection.

Push the tubing firmly into each fitting until it seats securely. You'll feel a slight click or resistance when it's properly connected. That's it — the hardest part is done.

Step 5: Position and Secure

Place the Charging Chamber in a stable position. Under the sink works beautifully for most installations. The Chamber can sit horizontally or vertically — water flows through the crystal matrix effectively in any orientation. Make sure the tubing has gentle curves rather than sharp kinks, which could restrict water flow.

Step 6: Turn the Water Back On

Turn your water supply valve back on (counterclockwise). Let the system pressurize for a minute, then open your RO faucet and let water flow through for 2-3 minutes. This flushes the line and allows the crystal matrix inside the Charging Chamber to begin its work.

Check all connections for leaks during this flush period. If you see any drips, simply push the tubing more firmly into the fitting or tighten the connection slightly.

Step 7: Feel the Difference

Pour yourself a glass. This is the moment. The water flowing from your tap has now been filtered to remove contaminants, then passed through our proprietary arrangement of crystals that restructures it into coherent hexagonal clusters, raises pH naturally, remineralizes with beneficial trace minerals, and amplifies its energetic properties.

This is the same water that the Emoto Institute verified produces beautiful hexagonal crystals — a signature of water in its highest organized state. And it's flowing from your tap, on demand, every single day.

Tips for the Best Experience

Give it a day. While you'll notice the difference immediately, many customers report that the water's character deepens over the first 24-48 hours as the crystal matrix fully activates with continuous water flow.

Share with family first. Before telling anyone what changed, pour them a glass and ask if they notice anything different. Children especially tend to respond immediately — reaching for more without any prompting.

Consider your whole system. The Charging Chamber structures water from every tap connected to your filtration system. If you have a whole-home RO system, every faucet, shower, and appliance benefits. For point-of-use systems, the kitchen tap is the most impactful starting point.

For Businesses: Installation Is Just as Simple

Yoga studios, wellness centers, medical offices, restaurants, and hotels install the Crystal Charging Chamber the same way — inline after their existing filtration. The Populus Hotel in Denver integrated Rius Water into their system to offer structured water to every guest. The installation process is identical whether you're serving a family of four or hundreds of customers daily.

For businesses considering the switch from water delivery services, the Charging Chamber eliminates recurring costs while providing something delivery can never offer — unlimited, freshly structured water on demand.

Frequently Asked Questions

Do I need a plumber to install the Charging Chamber?

No. The Crystal Charging Chamber uses standard 1/4" push-fit connections that anyone can handle. If you can connect a garden hose, you can install the Charging Chamber. Most customers complete the installation in under 30 minutes.

Does the Charging Chamber need electricity or maintenance?

No electricity, no replacement filters, no maintenance of any kind. The crystal matrix works passively and indefinitely. Once installed, it simply works — day after day, year after year.

Will the Charging Chamber work with my specific filtration system?

Yes. The Charging Chamber connects via standard 1/4" post-filter tubing, which is used by virtually all residential and commercial RO systems. If your system uses a different size, a simple adapter makes it compatible. Learn more about how reverse osmosis systems work with the Charging Chamber.

How long does the Charging Chamber last?

Indefinitely. There are no consumable parts, no degradation over time, and no diminishing returns. The $429 one-time investment provides structured water for as long as you have the unit.

Your Water, Transformed

In 30 minutes and seven simple steps, you've transformed your water system from ordinary filtration into something extraordinary. Every glass you pour now carries the structure, the energy, and the vibrational integrity that Dr. Pollack's research identified in nature's most pristine water sources. Feel the difference — from the very first sip.

Ready to install yours? Order your Crystal Charging Chamber today — each one is handcrafted with approximately 4 weeks lead time. Questions? Contact us at structure@riuswater.com or (303) 219-0623.